Onshore Production Module

This is the first module in the NetCo$ter  system released by Bayphase for third party use.

A NetCo$ter  Onshore Production cost estimate is developed in three steps:

1. Production Data is entered.
2. Production Configuration is defined.
3. Cost Estimate is run.

The best way to explain how the system works is to follow the walkthrough provided in the link above.

In developing costs for an onshore production system the following input steps will be followed:

1. Project details                                    
2. Cost Data Base Selection                                    
3. Project Type Definition: Oil/Condensate/Non-associated Gas                               
4. Key Field and Production Data Definition
5. Production Configuration Definition
6. Detailing of Production Configuration
   1. Separation
   2. Gas Treatment
   3. Utilities

The User is guided through each of the above input steps to define reserves, set the key production data, and configure the facilities; specify the number of trains and the sparing philosophy to be adopted in the plant. The program at each stage provides options for the users consider that can either be used or rejected for the user own information.

Once all the data is entered a NetCo$ter        is run; the results generated consist of three elements:

  Onshore Production Module Capability  

1. Technical Summary: defining production rates, production configuration and utilities consumption
2. Development Cost Summary: CAPEX breakdown
3. Operating Cost Summary: OPEX breakdown

The module is highly flexible and can handle just about any surface production facility, from very small to very large. Some of its key features include:

• Multiple Trains: up to 9 trains per production facility can be handled
• Flexible Sparing: within trains different sparing configurations can be adopted at equipment level (1x100%, 2x50%, 3x33%, 3x50%, 2x100%)
• A wide variety of production units can be included in any given estimate - many not considered by other similar cost estimating software - including:
  • Slug Catchers
  • Production Separation
  • Desalters
  • Amine Treatment
  • Oil Storage
  • Condensate Recovery
  • Acid Gas Compression
  • Selective Amine Treatment
  • Sulphur Slurrification
  • Solid Sulphur Treatment
  • Liquid Sweetening
  • H₂S Compression
  • Natural Gas Re-injection
  • Water Treatment and Injection
  • Plant Utilities
• The module has significant in-built capability with respect to the handling of sour and acid gas:
  • Amine treatment
  • Selective Amine Treatment
  • Sulphur Recovery Claus Unit
  • Acid Gas Injection
  •  H₂S Injection
  • CO₂ Injection/Sequestration
  • Solid Sulfur Treatment
  • Liquid Sweetening
  • Sulphur Disposal:
    • Yellow Cake Storage
    • Down hole Injection of Slurry

 The outputs from NetCo$ter  can be exported as a series of spread sheets and as such can be used with other cost estimation software either to verify results or imported as raw cost data. 

PLEASE CONTACT BAYPHASE VIA THE CONTACT FORM BELOW TO ARRANGE FOR A FREE TRIAL OF THIS ROBUST COST ESTIMATION TOOL.

What You Get:
- 20 year License for unlimited use on a Single PC.
- Support for 1 year and updates issued during that period

Delivery:
- After registering your interest you will be contacted and offered a trial. The software and the license code will be delivered to you via email.

Cost:
- £7,500(Seven Thousand Five Hundred Pounds Sterling).

Following your trial should you decide purchase you will be provided with license keys following receipt of payment either through an invoice or the Google Checkout Buttons on this page.

It is possible to arrange for limited case runs of the software at lower cost than that quoted above discuss that with us when you are contacted with respect to your trial. 

Purchase